// Lml 22 driver

#define MJPG_VERSION "LML33 v0.2"

// Various minor numbers (functions) of the device
#define MJPG_MINOR_STATUS 0
#define MJPG_MINOR_VIDEO 1
#define MJPG_MINOR_FRAME 2
#define MJPG_MINOR_STILL 3

// The following values can be modified to tune/set default behaviour of the
// driver.

// The number of uS delay in I2C state transitions (probably >= 10)
#define I2C_DELAY 50

// The amount of spinning to do before the I2C bus is timed out
#define I2C_TIMEOUT 10000000

// The amount of spinning to do before the guest bus is timed out
#define GUEST_TIMEOUT 10000000

// The amount of spinning to do before the polling of the still
// transfer port is aborted.
#define STILL_TIMEOUT 1000000

// The following number is the maximum number of cards permited. Each
// card found is mapped to a device minor number starting from 0.
#define MAX_CARDS 1

// The following is the number of device types supported.
#define DEVICE_COUNT 2

// The number of 8K pages per buffer, we will allocate four buffers,
// locked into memory whenever the device is open so modify with care.
#define PAGES 32

// The following are the datastructures needed by the device.
#define ZR36057_I2C_BUS		0x044
// which bit of ZR36057_I2C_BUS is which
#define ZR36057_I2C_SCL		1
#define ZR36057_I2C_SDA		2
#define ZR36057_INTR_JPEGREP	0x08000000
#define ZR36057_INTR_STAT	0x03c

// A Device records the properties of the various card types supported.
typedef struct {
	int	number;		// The H33_CARDTYPE_ assigned
	char	*card_name;	// A string name
	int	zr060addr;	// Which guest bus address for the ZR36060
} Device;

// The remainder of the #defs are constants which should not need changing.

// The PCI vendor and device ids of the zoran chipset on the dc30
// these really belong in pci.h
#define PCI_VENDOR_ZORAN		0x11de
#define PCI_DEVICE_ZORAN_36057		0x6057
#define PCI_DEVICE_ZORAN_36067		PCI_DEVICE_ZORAN_36057

#define BT819Addr 0x8a
#define BT856Addr 0x88

#define MB 0x100000
#define NBUF 4

#define FRAGM_FINAL_B 1
#define STAT_BIT 1

typedef struct FrameHeader		FrameHeader;
typedef struct MjpgDrv			MjpgDrv;
typedef struct Fragment			Fragment;
typedef struct FragmentTable		FragmentTable;
typedef struct CodeData			CodeData;
typedef struct ML33Board		LML33Board;

#define FRAGSIZE (MB/NBUF)

struct Fragment {
	uchar	fragbytes[FRAGSIZE];
};

struct FragmentTable {	// Don't modify this struct, used by h/w
	ulong		addr;		// Physical address
	ulong		leng;
};

struct CodeData {	// Don't modify this struct, used by h/w
	ulong		statCom[4];		// Physical address
	FragmentTable	fragdesc[4];
	Fragment	frag[4];
};

static void *		pciPhysBaseAddr;
static ulong		pciBaseAddr;
static Pcidev *		pcidev;

//If we're on the little endian architecture, then 0xFF, 0xD8 byte sequence is
#define MRK_SOI		0xD8FF
#define MRK_APP3	0xE3FF
#define APP_NAME	"LML"

struct FrameHeader	// Don't modify this struct, used by h/w
{
	short mrkSOI;
	short mrkAPP3;
	short lenAPP3;
	char nm[4];
	short frameNo;
	ulong sec;
	ulong usec;
	ulong frameSize;
	ulong frameSeqNo;
};