#include "u.h"
#include "lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "io.h"
#include "ureg.h"
/*
* trap/interrupt gates
*/
Segdesc ilt[256];
void (*ivec[256])(void*);
void
sethvec(int v, void (*r)(void), int type)
{
ilt[v].d0 = ((ulong)r)&0xFFFF|(KESEL<<16);
ilt[v].d1 = ((ulong)r)&0xFFFF0000|SEGP|SEGPL(3)|type;
}
void
setvec(int v, void (*r)(Ureg*), int type)
{
ilt[v].d1 &= ~SEGTYPE;
ilt[v].d1 |= type;
ivec[v] = r;
}
/*
* set up the interrupt/trap gates
*/
void
trapinit(void)
{
int i;
/*
* set the standard traps
*/
sethvec(0, intr0, SEGTG);
sethvec(1, intr1, SEGTG);
sethvec(2, intr2, SEGTG);
sethvec(3, intr3, SEGTG);
sethvec(4, intr4, SEGTG);
sethvec(5, intr5, SEGTG);
sethvec(6, intr6, SEGTG);
sethvec(7, intr7, SEGTG);
sethvec(8, intr8, SEGTG);
sethvec(9, intr9, SEGTG);
sethvec(10, intr10, SEGTG);
sethvec(11, intr11, SEGTG);
sethvec(12, intr12, SEGTG);
sethvec(13, intr13, SEGTG);
sethvec(14, intr14, SEGTG);
sethvec(15, intr15, SEGTG);
sethvec(16, intr16, SEGTG);
sethvec(17, intr17, SEGTG);
sethvec(18, intr18, SEGTG);
sethvec(19, intr19, SEGTG);
sethvec(20, intr20, SEGTG);
sethvec(21, intr21, SEGTG);
sethvec(22, intr22, SEGTG);
sethvec(23, intr23, SEGTG);
/*
* set all others to unknown
*/
for(i = 24; i < 256; i++)
sethvec(i, intrbad, SEGIG);
/*
* tell the hardware where the table is (and how long)
*/
lidt(ilt, sizeof(ilt));
/*
* Set up the 8259 interrupt processor #1.
* Make 8259 interrupts starting at vector I8259vec.
*
* N.B. This is all magic to me. It comes from the
* IBM technical reference manual. I just
* changed the vector.
*/
outb(Int0ctl, 0x11); /* ICW1 - edge, master, ICW4 */
outb(Int0aux, Int0vec); /* ICW2 - interrupt vector */
outb(Int0aux, 0x04); /* ICW3 - master level 2 */
outb(Int0aux, 0x01); /* ICW4 - master, 8086 mode */
outb(Int0aux, 0x00); /* mask - all enabled */
}
/*
* All traps
*/
trap(Ureg *ur)
{
if(ur->trap>=256 || ivec[ur->trap] == 0)
panic("bad trap type %d\n", ur->trap);
(*ivec[ur->trap])(ur);
INT0ENABLE;
}