#include "u.h"
#include "../port/lib.h"
#include "mem.h"
#include "dat.h"
#include "fns.h"
#include "io.h"
#include "../port/error.h"

#include <libg.h>
#include "screen.h"
#include "vga.h"

extern Bitmap gscreen;
extern Cursor curcursor;

static Lock clgd542xlock;
static ulong storage;

static void
setclgd542xpage(int page)
{
	if(vgaxi(Seqx, 0x07) & 0xF0)
		page = 0;
	if(vgaxi(Seqx, 0x0B) & 0x20)
		vgaxo(Grx, 0x09, page<<2);
	else
		vgaxo(Grx, 0x09, page<<4);
}

static void
clgd542xpage(int page)
{
	lock(&clgd542xlock);
	setclgd542xpage(page);
	unlock(&clgd542xlock);
}

static int
clgd542xlinear(ulong* mem, ulong* size, ulong* align)
{
	ulong baseaddr;
	static Pcidev *p;

	if(*size != 16*MB)
		return 0;
	if(*align == 0)
		*align = 16*MB;
	else if(*align & (16*MB-1))
		return 0;

	*mem = 0;

	/*
	 * This obviously isn't good enough on a system with
	 * more than one PCI card from Cirrus.
	 */
	if(p == 0 && (p = pcimatch(p, 0x1013, 0)) == 0)
		return 0;

	switch(p->did){

	case 0xA0:
	case 0xA8:
	case 0xAC:
		break;

	default:
		return 0;
	}

	/*
	 * This doesn't work if the card is on the other side of a
	 * a bridge. Need to coordinate with PCI support.
	 */
	if((baseaddr = upamalloc(0, *size, *align)) == 0)
		return 0;
	*mem = baseaddr;
	baseaddr = PADDR(baseaddr);
	pcicfgw32(p, PciBAR0, baseaddr);

	return *mem;
}

static void
disable(void)
{
	uchar sr12;

	lock(&clgd542xlock);
	sr12 = vgaxi(Seqx, 0x12);
	vgaxo(Seqx, 0x12, sr12 & ~0x01);
	unlock(&clgd542xlock);
}

static void
enable(void)
{
	uchar sr12;
	int mem, x;
 
	/*
	 * Disable the cursor.
	 */
	lock(&clgd542xlock);
	sr12 = vgaxi(Seqx, 0x12);
	vgaxo(Seqx, 0x12, sr12 & ~0x01);

	/*
	 * Cursor colours.  
	 */
	vgaxo(Seqx, 0x12, sr12|0x02);
	setcolor(0x00, Pwhite<<(32-6), Pwhite<<(32-6), Pwhite<<(32-6));
	setcolor(0x0F, Pblack<<(32-6), Pblack<<(32-6), Pblack<<(32-6));
	vgaxo(Seqx, 0x12, sr12);

	mem = 0;
	switch(vgaxi(Crtx, 0x27) & ~0x03){

	case 0x88:				/* CL-GD5420 */
	case 0x8C:				/* CL-GD5422 */
	case 0x94:				/* CL-GD5424 */
	case 0x80:				/* CL-GD5425 */
	case 0x90:				/* CL-GD5426 */
	case 0x98:				/* CL-GD5427 */
	case 0x9C:				/* CL-GD5429 */
		/*
		 * The BIOS leaves the memory size in Seq0A, bits 4 and 3.
		 * See Technical Reference Manual Appendix E1, Section 1.3.2.
		 *
		 * The storage area for the 64x64 cursors is the last 16Kb of
		 * display memory.
		 */
		mem = (vgaxi(Seqx, 0x0A)>>3) & 0x03;
		break;

	case 0xA0:				/* CL-GD5430 */
	case 0xA8:				/* CL-GD5434 */
	case 0xAC:				/* CL-GD5436 */
		/*
		 * Attempt to intuit the memory size from the DRAM control
		 * register. Minimum is 512KB.
		 * If DRAM bank switching is on then there's double.
		 */
		x = vgaxi(Seqx, 0x0F);
		mem = (x>>3) & 0x03;
		if(x & 0x80)
			mem++;
		break;

	default:				/* uh, ah dunno */
		break;
	}
	storage = ((256<<mem)-16)*1024;

	/*
	 * Set the current cursor to index 0
	 * and turn the 64x64 cursor on.
	 */
	vgaxo(Seqx, 0x13, 0);
	vgaxo(Seqx, 0x12, sr12|0x05);

	unlock(&clgd542xlock);
}

static void
initcursor(Cursor* c, int xo, int yo, int index)
{
	uchar *p;
	uint p0, p1;
	int x, y;

	/*
	 * Is linear addressing turned on? This will determine
	 * how we access the cursor storage.
	 */
	if(vgaxi(Seqx, 0x07) & 0xF0)
		p = ((uchar*)gscreen.base) + storage;
	else {
		setclgd542xpage(storage>>16);
		p = ((uchar*)gscreen.base) + (storage & 0xFFFF);
	}
	p += index*1024;

	for(y = yo; y < 16; y++){
		p0 = c->clr[2*y];
		p1 = c->clr[2*y+1];
		if(xo){
			p0 = (p0<<xo)|(p1>>(8-xo));
			p1 <<= xo;
		}
		*p++ = p0;
		*p++ = p1;

		for(x = 16; x < 64; x += 8)
			*p++ = 0x00;

		p0 = c->clr[2*y]|c->set[2*y];
		p1 = c->clr[2*y+1]|c->set[2*y+1];
		if(xo){
			p0 = (p0<<xo)|(p1>>(8-xo));
			p1 <<= xo;
		}
		*p++ = p0;
		*p++ = p1;

		for(x = 16; x < 64; x += 8)
			*p++ = 0x00;
	}
	while(y < 64+yo){
		for(x = 0; x < 64; x += 8){
			*p++ = 0x00;
			*p++ = 0x00;
		}
		y++;
	}
}

static void
load(Cursor* c)
{
	uchar sr12;

	/*
	 * Lock the display memory so we can update the
	 * cursor bitmap if necessary.
	 * Disable the cursor.
	 * If it's the same as the last cursor loaded,
	 * just make sure it's enabled and index 0.
	 */
	lock(&clgd542xlock);
	sr12 = vgaxi(Seqx, 0x12);
	vgaxo(Seqx, 0x12, sr12 & ~0x01);

	if(memcmp(c, &curcursor, sizeof(Cursor)) == 0){
		vgaxo(Seqx, 0x13, 0);
		vgaxo(Seqx, 0x12, sr12|0x05);
		unlock(&clgd542xlock);
		return;
	}
	memmove(&curcursor, c, sizeof(Cursor));
	initcursor(c, 0, 0, 0);

	/*
	 * Enable the cursor.
	 */
	vgaxo(Seqx, 0x13, 0);
	vgaxo(Seqx, 0x12, sr12|0x05);
{
for(storage = 0; storage < (2048-32)*1024; storage += 16*1024)
    initcursor(c, 0, 0, 0);
}

	unlock(&clgd542xlock);
}

static int
move(Point p)
{
	int index, x, xo, y, yo;

	if(canlock(&clgd542xlock) == 0)
		return 1;

	index = 0;
	if((x = p.x+curcursor.offset.x) < 0){
		xo = -x;
		x = 0;
	}
	else
		xo = 0;
	if((y = p.y+curcursor.offset.y) < 0){
		yo = -y;
		y = 0;
	}
	else
		yo = 0;

	if(xo || yo){
		initcursor(&curcursor, xo, yo, 1);
		index = 1;
	}
	vgaxo(Seqx, 0x13, index<<2);
	
	vgaxo(Seqx, 0x10|((x & 0x07)<<5), (x>>3) & 0xFF);
	vgaxo(Seqx, 0x11|((y & 0x07)<<5), (y>>3) & 0xFF);

	unlock(&clgd542xlock);
	return 0;
}

static Hwgc clgd542xhwgc = {
	"clgd542xhwgc",
	enable,
	load,
	move,
	disable,

	0,
};

static Vgac clgd542x = {
	"clgd542x",
	clgd542xpage,
	clgd542xlinear,

	0,
};

void
vgaclgd542xlink(void)
{
	addvgaclink(&clgd542x);
	addhwgclink(&clgd542xhwgc);
}