~kris/9p

9hist

ref: 19bf0531d825cfca85fbf68cbce60f2a3e7cf7e3 9hist/pc/io.h -rw-r--r-- 4.5 KiB
19bf0531 — David du Colombier Plan 9 from Bell Labs 1997-06-03 29 years ago
                                                                                
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
#define X86STEPPING(x)	((x) & 0x0F)
#define X86MODEL(x)	(((x)>>4) & 0x0F)
#define X86FAMILY(x)	(((x)>>8) & 0x0F)

enum {
	VectorBPT	= 3,		/* breakpoint */
	VectorCNA	= 7,		/* coprocessor not available */
	VectorCSO	= 9,		/* coprocessor segment overrun */
	VectorPF	= 14,		/* page fault */
	VectorCERR	= 16,		/* coprocessor error */

	VectorLAPIC	= 32,		/* local APIC interrupts */
	VectorLINT0	= VectorLAPIC+0,/* LINT[01] must be offsets 0 and 1 */
	VectorLINT1	= VectorLAPIC+1,
	VectorTIMER	= VectorLAPIC+2,
	VectorERROR	= VectorLAPIC+3,
	VectorPCINT	= VectorLAPIC+4,
	VectorSPURIOUS	= VectorLAPIC+15,/* must have bits [3-0] == 0x0F */
	MaxVectorLAPIC	= VectorLAPIC+15,

	VectorSYSCALL	= 64,

	VectorPIC	= 128,		/* external [A]PIC interrupts */
	VectorCLOCK	= VectorPIC+0,
	VectorKBD	= VectorPIC+1,
	VectorUART1	= VectorPIC+3,
	VectorUART0	= VectorPIC+4,
	VectorPCMCIA	= VectorPIC+5,
	VectorFLOPPY	= VectorPIC+6,
	VectorLPT	= VectorPIC+7,
	VectorIRQ7	= VectorPIC+7,
	VectorAUX	= VectorPIC+12,	/* PS/2 port */
	VectorIRQ13	= VectorPIC+13,	/* coprocessor on x386 */
	VectorATA0	= VectorPIC+14,
	MaxVectorPIC	= VectorPIC+15,
};

enum {
	BusCBUS		= 0,		/* Corollary CBUS */
	BusCBUSII,			/* Corollary CBUS II */
	BusEISA,			/* Extended ISA */
	BusFUTURE,			/* IEEE Futurebus */
	BusINTERN,			/* Internal bus */
	BusISA,				/* Industry Standard Architecture */
	BusMBI,				/* Multibus I */
	BusMBII,			/* Multibus II */
	BusMCA,				/* Micro Channel Architecture */
	BusMPI,				/* MPI */
	BusMPSA,			/* MPSA */
	BusNUBUS,			/* Apple Macintosh NuBus */
	BusPCI,				/* Peripheral Component Interconnect */
	BusPCMCIA,			/* PC Memory Card International Association */
	BusTC,				/* DEC TurboChannel */
	BusVL,				/* VESA Local bus */
	BusVME,				/* VMEbus */
	BusXPRESS,			/* Express System Bus */
};

#define MKBUS(t,b,d,f)	(((t)<<24)|(((b)&0xFF)<<16)|(((d)&0x1F)<<11)|(((f)&0x07)<<8))
#define BUSFNO(tbdf)	(((tbdf)>>8)&0x07)
#define BUSDNO(tbdf)	(((tbdf)>>11)&0x1F)
#define BUSBNO(tbdf)	(((tbdf)>>16)&0xFF)
#define BUSTYPE(tbdf)	((tbdf)>>24)
#define BUSBDF(tbdf)	((tbdf)&0x00FFFF00)
#define BUSUNKNOWN	(-1)

enum {
	MaxEISA		= 16,
	EISAconfig	= 0xC80,
};

/*
 * PCI support code.
 */
enum {					/* type 0 and type 1 pre-defined header */
	PciVID		= 0x00,		/* vendor ID */
	PciDID		= 0x02,		/* device ID */
	PciPCR		= 0x04,		/* command */
	PciPSR		= 0x06,		/* status */
	PciRID		= 0x08,		/* revision ID */
	PciCCRp		= 0x09,		/* programming interface class code */
	PciCCRu		= 0x0A,		/* sub-class code */
	PciCCRb		= 0x0B,		/* base class code */
	PciCLS		= 0x0C,		/* cache line size */
	PciLTR		= 0x0D,		/* latency timer */
	PciHDT		= 0x0E,		/* header type */
	PciBST		= 0x0F,		/* BIST */

	PciBAR0		= 0x10,		/* base address */
	PciBAR1		= 0x14,

	PciINTL		= 0x3C,		/* interrupt line */
	PciINTP		= 0x3D,		/* interrupt pin */
};

enum {					/* type 0 pre-defined header */
	PciBAR2		= 0x18,
	PciBAR3		= 0x1C,
	PciBAR4		= 0x20,
	PciBAR5		= 0x24,
	PciCIS		= 0x28,		/* cardbus CIS pointer */
	PciSVID		= 0x2C,		/* subsystem vendor ID */
	PciSID		= 0x2E,		/* cardbus CIS pointer */
	PciEBAR0	= 0x30,		/* expansion ROM base address */
	PciMGNT		= 0x3E,		/* burst period length */
	PciMLT		= 0x3F,		/* maximum latency between bursts */
};

enum {					/* type 1 pre-defined header */
	PciPBN		= 0x18,		/* primary bus number */
	PciSBN		= 0x19,		/* secondary bus number */
	PciUBN		= 0x1A,		/* subordinate bus number */
	PciSLTR		= 0x1B,		/* secondary latency timer */
	PciIBR		= 0x1C,		/* I/O base */
	PciILR		= 0x1D,		/* I/O limit */
	PciSPSR		= 0x1E,		/* secondary status */
	PciMBR		= 0x20,		/* memory base */
	PciMLR		= 0x22,		/* memory limit */
	PciPMBR		= 0x24,		/* prefetchable memory base */
	PciPMLR		= 0x26,		/* prefetchable memory limit */
	PciPUBR		= 0x28,		/* prefetchable base upper 32 bits */
	PciPULR		= 0x2C,		/* prefetchable limit upper 32 bits */
	PciIUBR		= 0x30,		/* I/O base upper 16 bits */
	PciIULR		= 0x32,		/* I/O limit upper 16 bits */
	PciEBAR1	= 0x28,		/* expansion ROM base address */
	PciBCR		= 0x3E,		/* bridge control register */
};

typedef struct Pcidev Pcidev;
typedef struct Pcidev {
	int	tbdf;			/* type+bus+device+function */
	ushort	vid;			/* vendor ID */
	ushort	did;			/* device ID */
	ulong	bar[2];			/* base address */
	uchar	intl;			/* interrupt line */

	Pcidev*	next;			/* next device on this bno */
} Pcidev;

/*
 * PCMCIA support code.
 */
/*
 * Map between ISA memory space and PCMCIA card memory space.
 */
struct PCMmap {
	ulong	ca;			/* card address */
	ulong	cea;			/* card end address */
	ulong	isa;			/* ISA address */
	int	len;			/* length of the ISA area */
	int	attr;			/* attribute memory */
	int	ref;
};