~kris/9p

9hist

ref: 1849bbb87d5c77d48b7f8600ac6c421b8dc05122 9hist/power/clock.c -rw-r--r-- 2.1 KiB
1849bbb8 — David du Colombier Plan 9 from Bell Labs 1994-03-20 32 years ago
                                                                                
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
#include	"u.h"
#include	"../port/lib.h"
#include	"mem.h"
#include	"dat.h"
#include	"fns.h"
#include	"io.h"

#include	"ureg.h"

void
delay(int ms)
{
	int i;

	ms *= 7000;		/* experimentally determined */
	for(i=0; i<ms; i++)
		;
}

/*
 * AMD 82C54 timer
 *
 * ctr2 is clocked at 3.6864 MHz. ctr2 output clocks ctr0 and ctr1.
 * ctr0 drives INTR2.  ctr1 drives INTR4.
 * To get 100Hz, 36864==9*4096=36*1024 so clock ctr2
 * every 1024 and ctr0 every 36.
 */

struct Timer{
	uchar	cnt0,
		junk0[3];
	uchar	cnt1,
		junk1[3];
	uchar	cnt2,
		junk2[3];
	uchar	ctl,
		junk3[3];
};


#define	TIME0	(36*MS2HZ/10)
#define	TIME1	0xFFFFFFFF	/* profiling disabled */
#define	TIME2	1024
#define	CTR(x)	((x)<<6)	/* which counter x */
#define	SET16	0x30		/* lsbyte then msbyte */
#define	MODE2	0x04		/* interval timer */

void
clockinit(void)
{
	Timer *t;
	int i;

	t = TIMERREG;
	t->ctl = CTR(2)|SET16|MODE2;
	t->cnt2 = TIME2&0xFF;
	t->cnt2 = (TIME2>>8)&0xFF;
	t->ctl = CTR(1)|SET16|MODE2;
	t->cnt1 = TIME1&0xFF;
	t->cnt1 = (TIME1>>8)&0xFF;
	t->ctl = CTR(0)|SET16|MODE2;
	t->cnt0 = TIME0;
	t->cnt0 = (TIME0>>8)&0xFF;
	i = *CLRTIM0;
	USED(i);
	i = *CLRTIM1;
	USED(i);
	m->ticks = 0;
}

void
clock(Ureg *ur)
{
	Proc *p;
	int i, nrun;

	if((ur->cause&INTR2) == 0) {
		if(ur->cause & INTR4) {
			i = *CLRTIM1;
			USED(i);
		}
		return;
	}
	nrun = 0;
	i = *CLRTIM0;
	USED(i);

	m->ticks++;
	if(m->proc)
		m->proc->pc = ur->pc;

	if(m->machno == 0) {
		p = m->proc;
		if(p) {
			nrun++;
			p->time[p->insyscall]++;
		}
		for(i=1; i<conf.nmach; i++) {
			if(active.machs & (1<<i)) {
				p = MACHP(i)->proc;
				if(p) {
					p->time[p->insyscall]++;
					nrun++;
				}
			}
		}
		nrun = (nrdy+nrun)*1000;
		m->load = (m->load*19+nrun)/20;
	}
	duartslave();
	if((active.machs&(1<<m->machno)) == 0)
		return;

	if(active.exiting && active.machs&(1<<m->machno)) {
		print("someone's exiting\n");
		exit(0);
	}

	checkalarms();
	kproftimer(ur->pc);

	if(up == 0 || (ur->status&IEP) == 0 || up->state != Running)
		return;

	if(anyready())
		sched();

	/* user profiling clock */
	if(ur->status & KUP)
		(*(ulong*)(USTKTOP-BY2WD)) += TK2MS(1);	
}