#include	"u.h"
#include	"lib.h"
#include	"mem.h"
#include	"dat.h"
#include	"fns.h"
#include	"io.h"

#include	"ureg.h"

void
delay(int ms)
{
	ulong t, *p;
	int i;

	ms *= 7000;	/* experimentally determined */
	for(i=0; i<ms; i++)
		;
}

/*
 * AMD 82C54 timer
 *
 * ctr2 is clocked at 3.6864 MHz.
 * ctr2 output clocks ctr0 and ctr1.
 * ctr0 drives INTR2.  ctr1 drives INTR4.
 * To get 100Hz, 36864==9*4096=36*1024 so clock ctr2 every 1024 and ctr0 every 36.
 */

struct Timer{
	uchar	cnt0,
		junk0[3];
	uchar	cnt1,
		junk1[3];
	uchar	cnt2,
		junk2[3];
	uchar	ctl,
		junk3[3];
};


#define	TIME0	(36*MS2HZ/10)
#define	TIME1	0xFFFFFFFF	/* profiling disabled */
#define	TIME2	1024
#define	CTR(x)	((x)<<6)	/* which counter x */
#define	SET16	0x30		/* lsbyte then msbyte */
#define	MODE2	0x04		/* interval timer */


/* #define	PROFILING /**/
#ifdef PROFILING
#undef TIME1
#define	TIME1	211		/* profiling clock; prime; about 10ms per tick */
#define	NPROF	50000
ulong	profcnt[MAXMACH*NPROF];
#endif

void
clockinit(void)
{
	Timer *t;
	int i;

	t = TIMERREG;
	t->ctl = CTR(2)|SET16|MODE2;
	t->cnt2 = TIME2&0xFF;
	t->cnt2 = (TIME2>>8)&0xFF;
	t->ctl = CTR(1)|SET16|MODE2;
	t->cnt1 = TIME1&0xFF;
	t->cnt1 = (TIME1>>8)&0xFF;
	t->ctl = CTR(0)|SET16|MODE2;
	t->cnt0 = TIME0;
	t->cnt0 = (TIME0>>8)&0xFF;
	i = *CLRTIM0;
	USED(i);
	i = *CLRTIM1;
	USED(i);
	m->ticks = 0;
}



void
clock(Ureg *ur)
{
	int i;
	Proc *p;

	if(ur->cause & INTR2){
		i = *CLRTIM0;
		USED(i);
		m->ticks++;
		if(m->machno == 0){
			p = m->proc;
			if(p)
				p->time[p->insyscall]++;
			for(i=1; i<conf.nmach; i++){
				if(active.machs & (1<<i)){
					p = MACHP(i)->proc;
					if(p)
						p->time[p->insyscall]++;
				}
			}
			printslave();
		}
		if(active.exiting && active.machs&(1<<m->machno)){
			print("someone's exiting\n");
			exit();
		}
		checkalarms();
		if(u && (ur->status&IEP) && u->p && u->p->state==Running){
			if(anyready())
				sched();
			if(u->nnote && (ur->status&KUP))
				notify(ur);
		}
		return;
	}
	if(ur->cause & INTR4){
		extern ulong start;

		i = *CLRTIM1;
		USED(i);
#ifdef	PROFILING
		pc -= (ulong)&start;
		pc /= sizeof(ulong);
		if(pc < NPROF)
			profcnt[m->machno*NPROF+pc]++;
#endif
		return;
	}
}